Skip to content

Troubleshooting

Known Problems

  • Real devices with iOS/iPadOS 15+ show an overlay with the text Automation Running Hold both volume buttons to stop while WebDriverAgent is running. This is a known limitation of the XCTest framework. Note that screenshotting functionality is not affected (i.e. the overlay is not visible on taken screenshots).
  • Real devices with iOS/iPadOS 15+ require passcode or Touch ID when starting a new session. A workaround for this is to disable passcode/Touch ID on the device.
  • After many failures on a real device, it could transition to a state where connections are no longer being accepted. Rebooting the device can help remedy this problem. Please read this issue for more details.
  • shake is implemented via AppleScript and works only on Simulator due to lack of support from Apple

Interact with dialogs managed by com.apple.springboard

System dialogs, such as permission dialogs, might not be interactable directly when the active application is not com.apple.springboard. Despite a similar look, dialogs belonging to the active session application (e.g. initially passed as appium:app or appium:bundleId capability value) do not require such adjustment.

XCUITest driver offers a few methods to handle them.

  • mobile: alert
  • Enable appium:autoAcceptAlerts/appium:autoDismissAlerts, or interact with alerts via User Prompts in WebDriver endpoints
    • e.g. driver.switch_to.alert.accept with the Appium Ruby client
    • It might be necessary to coordinate element selection via acceptAlertButtonSelector/dismissAlertButtonSelector settings in Settings
  • Activate com.apple.springboard with mobile: activateApp before interacting with dialogs

Leftover Application Data on Real Devices

There might be a situation where application data is present on the real device, even if the application itself is not installed. This could happen if:

  • The app is in an offloaded state
  • The application state is cached
  • There was an unexpected failure while installing the app. An example of such failure is the ApplicationVerificationFailed which happens while installing an app signed with an invalid provisioning profile.

In the above cases, the application identifier will not be listed in the output of mobile: listApps, and it will not be detected by mobile: isAppInstalled. Setting appium:fullReset or appium:enforceAppInstall capabilities to true also will not help clear this data.

The only way to completely get rid of the cached application data is to call the mobile: removeApp command with the appropriate bundle identifier.

The driver does automatically try to resolve application installs that failed because of the MismatchedApplicationIdentifierEntitlement error. However, in cases when the previously installed application's provisioning profile is different from what currently the driver is trying to install, and if you explicitly set the driver to not perform application uninstall, then consider calling mobile: removeApp before the MismatchedApplicationIdentifierEntitlement error occurs. Example steps can be as follows:

  1. Start a session without appium:app and appium:bundleId capabilities
  2. Call mobile: removeApp for the target application's bundle id
  3. Install the test target with mobile: installApp
  4. Launch the application with mobile: launchApp or mobile: activateApp

Weird State

Real Device Stops Responding

Running tests on a real device is particularly flakey. If things stop responding, the only recourse is, most often, to restart the device. Logs in the form of the following may start to occur:

info JSONWP Proxy Proxying [POST /session] to [POST http://10.35.4.122:8100/session] with body: {"desiredCapabilities":{"ap..."
dbug WebDriverAgent Device: Jul 26 13:20:42 iamPhone XCTRunner[240] <Warning>: Listening on USB
dbug WebDriverAgent Device: Jul 26 13:21:42 iamPhone XCTRunner[240] <Warning>: Enqueue Failure: UI Testing Failure - Unable to update application state promptly. <unknown> 0 1
dbug WebDriverAgent Device: Jul 26 13:21:57 iamPhone XCTRunner[240] <Warning>: Enqueue Failure: UI Testing Failure - Failed to get screenshot within 15s <unknown> 0 1
dbug WebDriverAgent Device: Jul 26 13:22:57 iamPhone XCTRunner[240] <Warning>: Enqueue Failure: UI Testing Failure - App state of (null) is still unknown <unknown> 0 1

Command Takes 60+ Seconds

Sometimes it is possible to encounter slowdowns for an additional 60 seconds for a command that usually should not take long. This may be caused by a crash in the testmanagerd process on the device under test. In such case, the OS tries to restore the process, then wait for the resurrected daemon to connect to the target process, which causes the aforementioned delay.

This can be fixed by terminating the target application process. For example, if this behavior occurs while calling mobile: queryAppState, you can terminate the application once, or restart the device entirely. Please check this pull request for more details.

Real Device Security Settings

On some systems, especially CI ones, where tests are executed by command line agents, macOS Accessibility restrictions result in the WebDriverAgent process being unable to retrieve the development keys from the system keychain. This usually manifests by xcodebuild returning error code 65. One workaround for this is to use a private key that is not stored on the system keychain. See this issue and this Stack Exchange post.

To export the key, use

security create-keychain -p [keychain_password] MyKeychain.keychain
security import MyPrivateKey.p12 -t agg -k MyKeychain.keychain -P [p12_Password] -A

where MyPrivateKey.p12 is the private development key exported from the system keychain.

You can then use the appium:keychainPath and appium:keychainPassword capabilities to pass this keychain to WebDriverAgent.

Simulator Resetting

When testing on simulators, the driver tries to leave the simulator state as it found it:

  • If no udid is provided, the driver will create a new iOS simulator, run tests on it, and then delete the simulator
  • If a specific udid is provided for a simulator that is not running, the driver will boot the specified simulator, run tests on it, and then shut the simulator down
  • If a specific udid is provided for a simulator that is running, the driver will connect to the existing simulator, run tests, and then leave the simulator running

You can use the appium:noReset capability to adjust this behavior: setting it to true will leave the simulator running at the end of a test session.

Caching Issues During Build

Testing on iOS generates files that can sometimes get large. These include logs, temporary files, and derived data from Xcode runs, all of which are safe to delete if any issues arise. The files are usually found in the following locations, should they need to be deleted:

$HOME/Library/Logs/CoreSimulator/*
$HOME/Library/Developer/Xcode/DerivedData/*